8/3/2018 1:32 PM | |
Joined: 9/30/2016 Last visit: 6/12/2024 Posts: 913 Rating: (6) |
Thank you again Jay, By making HMI tags and displays for each bit in the 14 words I have verified that: DB501.DBW458 Bit 1 in WinCC SCADA is DB501,DBX459.1 And my gear levers look correct on the basic panels :-) But I still need to get the simulation with PLCSIM to work as can be seen here: https://support.industry.siemens.com/tf/ww/en/posts/how-do-i-get-plcsim-started-up-on-my-project/195794/?page=0&pageSize=10
------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 8/3/2018 2:02:54 PMNew subject after splitting |
|
8/3/2018 2:06 PM | |
Joined: 6/19/2017 Last visit: 6/12/2024 Posts: 8140 Rating: (165) |
Closed cause question posted twice.
|
My Forum is the place to personalize your profile, |
|
Follow us on