1/8/2009 9:39 AM | |
Joined: 5/28/2008 Last visit: 12/8/2015 Posts: 901 Rating: (136) |
Hello ste_angioni, i think you have to post more details about your problem... regards manfred |
1/8/2009 9:43 AM | |
Joined: 1/3/2009 Last visit: 6/30/2022 Posts: 161 Rating: (12) |
what do you need to know? |
Stefano Angioni |
|
1/8/2009 3:14 PM | |
Joined: 9/27/2006 Last visit: 8/14/2024 Posts: 12277 Rating: (2680) |
Hello ste-angioni; Well, we could use information on the revision levels both of the Protool and the Step 7 packages you are using. Or you could open the Compatibility matrix for Protool/Step 7 in the following link and determine for yourself if that is your problem: http://support.automation.siemens.com/WW/view/en/1958565 Hope this helps, Daniel Chartier |
Follow us on