Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How to make an invisible/visible push button when a tag was triggered?

Created by: AAB_11429 at: 10/13/2014 10:44 AM (5 Replies)

Rating (0)

Thanks 1

6 Entries

10/13/2014 10:44 AM	Rate (0)
AAB_11429 Posts: 20 Rating: (0)	Dear Expert, Actually, I already found a few topics regarding this. But, most questions are asking about make a button visible based on the username login. So, my question is how to make an invisible/visible push button when a tag was triggered? Tahnk you, Arsy
AAB_11429 Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

10/13/2014 11:11 AM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 1/5/2026 Posts: 6892 Rating: (1368)	AAB_11429 Dear Expert, Actually, I already found a few topics regarding this. But, most questions are asking about make a button visible based on the username login. So, my question is how to make an invisible/visible push button when a tag was triggered? Tahnk you, Arsy Hello, In a properties of a button-->Miscelllaneous-->Display-->yes (assign a binary tag here).There, you can also define other strategies.Try and update! I hope this helps, Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

10/13/2014 6:18 PM	Rate (0)
AAB_11429 Posts: 20 Rating: (0)	Dear hdhosseini, Yes,I use c-action, but I still didn't understand how to used the function. Refer to my attachment. Arsy Attachment visible1.jpg (307 Downloads)
AAB_11429 Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

10/13/2014 6:45 PM	Rate (0)
Michael K Gold Expert Joined: 9/3/2008 Last visit: 1/5/2026 Posts: 947 Rating: (164)	Hello, What hdhosseini was saying is you do not need a cscript. You can assign a tag directly. See the attached printscreen sample (it is WinCC 7.0 but you have the same option in later versions). Attachment C:\Assist\ButtonVisible.gif (407 Downloads)
	Last edited by: Michael K at: 10/13/2014 6:47 PM Michael
Suggestion To thank Quote Answer

10/14/2014 4:16 AM	Rate (0)
AAB_11429 Posts: 20 Rating: (0)	Hi!! Thank you Michael andhdhosseini!! Now, I understand, it's really simple actually after your help. Best regards, Arsy
AAB_11429 Posts: 20 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

3/27/2021 1:16 AM	Rate (0)
OLD BREWERY Posts: 4 Rating: (0)	Hi, I got in my project C-script as follows: #include "apdefap.h" BOOL _main(char* lpszPictureName, char* lpszObjectName, char* lpszPropertyName) { // WINCC:TAGNAME_SECTION_START // syntax: #define TagNameInAction "DMTagName" // next TagID : 1 // WINCC:TAGNAME_SECTION_END if (PASSCheckLevelPermission(5)) //Return-Type: BOOL return 1; return 0; // WINCC:PICNAME_SECTION_START // WINCC:PICNAME_SECTION_START // syntax: #define PicNameInAction "PictureName" // next PicID : 1 // WINCC:PICNAME_SECTION_END } Regards
OLD BREWERY Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Picture Controls

Follow us on