Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

s7 200 cpu216

Created by: saturnino at: 2/15/2009 5:01 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/15/2009 5:01 AM	Rate (0)
saturnino Posts: 4 Rating: (0)	i uploaded a program from s7-200 cpu 216.i notice there is a red letter saying invalid 3.can i also transfer this uploaded program to s7 200 cpu 226?? thanks
saturnino Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

2/17/2009 4:01 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 9/10/2025 Posts: 4416 Rating: (1485)	Hi, can you show us a printscreen of your red information?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

2/18/2009 11:42 AM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 9/10/2025 Posts: 4416 Rating: (1485)	Hi, I look you program. It is no fault. Just the code could not be represented in Ladder format. If you do a little change, you can corrected this effect. But it is no fault. You can donwload the original version if you want. Attachment untitled.JPG (160 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

2/19/2009 4:45 PM	Rate (0)
saturnino Posts: 4 Rating: (0)	THANKS MR PEGAIA, EVERYTHING WENT SMOOTHLY.!!!!!!!!!!!!!
saturnino Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on