Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Tag Logging_parameter Access

Created by: AutoGen_4903072 at: 7/9/2021 4:29 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/9/2021 4:29 PM	Rate (0)
AutoGen_4903072 Posts: 2 Rating: (0)	Hi, I want to use the "UNIT"(PARAMETER) field in a tag logging, Is there any way we can get the value into the script as we get the values in Online trend Control??? Regards Rahul Ravi
AutoGen_4903072 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/12/2021 1:15 PM	Rate (0)
bg2492 Posts: 7298 Rating: (2188)	Hello AutoGen_4903072, the UNIT is used in connection with the Representing of values in a Trend Control. The values are displayed as text at each time stamp or at every main gridline on the time axis. A unit can also be displayed in addition to the values. see manual: "SIMATIC HMI WinCC V7.5 SP1 WinCC Information System" "Representation Trend Lines" https://support.industry.siemens.com/cs/ww/en/view/109772961/18755000587 Regards Georg Berghof
bg2492 Posts: 7298 Rating: (2188)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on