Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

s7-300 cpuxxxxx

Created by: mastafa at: 2/23/2009 10:19 AM (13 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

2/27/2009 7:25 PM	Rate (0)
Gebhardt Karl Posts: 1502 Rating: (176)	Send a Picture of diagnostic-Info from the CPU.
Gebhardt Karl Posts: 1502 Rating: (176)
Suggestion To thank Quote Answer

2/28/2009 8:06 AM	Rate (0)
mastafa Posts: 14 Rating: (0)	when work seem this message and sp2 not read alarm red (et200s)not read Attachment 20090226011.jpg (364 Downloads)
mastafa Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

2/28/2009 8:10 AM	Rate (0)
mastafa Posts: 14 Rating: (0)	how solution do solut hardware or soft or connection eror so seem error address 3(connection address ) donot one know solution this problem .... when problem
mastafa Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

3/4/2009 5:05 AM	Rate (0)
how come Posts: 382 Rating: (47)	Dear Mastafa, From you attach it shows SF [system fault] and the CPU comes to a stop. SF can be caused by alot of reason. e.g Some logic programming error in your software, etc. Unfortunately, your pictures couldn't give much information of your system. Difficult to image the problem you have.If you can, post your whole system/ network configuration to the forum so that everyone can have a better idea to help you.
how come Posts: 382 Rating: (47)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on