Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Need WinCC script for swapping high-low words in the 32bit DW.

Created by: Jaikumar sekar at: 7/28/2021 9:02 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/28/2021 9:02 AM	Rate (0)
Jaikumar sekar Bronze Member Joined: 3/19/2019 Last visit: 12/9/2025 Posts: 104 Rating: (0)
	Last edited by: Jen_Moderator at: 07/28/2021 09:41:13 New subject after splitting Last edited by: Jaikumar sekar at: 07/28/2021 10:01:35 "If you want the answer - ask the question" Thanks and Regards Jaikumar S
Suggestion To thank

7/28/2021 9:14 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 1/14/2026 Posts: 36457 Rating: (4549)	Jaikumar sekar gkarofilakis Thanks SeanNielsen i am programming in VB script as i am more familiar. Any way thanks for your answer, for helping me Hi gkarofilakis, Can you provide me wincc script for swapping high-low words in the 32bit DW. i.e. swapping the values of 0-15bits into 16-31bits. Why do you also post for your problem here in this topic? You ask the same in this topic (10th reply): How to configure group display option presented in the @Overview area?

Suggestion To thank

7/28/2021 9:43 AM	Rate (0)
Jen_Moderator Posts: 8171 Rating: (174)	Closed cause question posted twice. The second thread with the subject How to configure group display option presented in the @Overview area? is published within the conference SIMATIC WinCC. Best regards, Jen_Moderator
Jen_Moderator Posts: 8171 Rating: (174)
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on