Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

WinCC Archive Tag Logging Backip

Created by: jabbi_king at: 8/28/2021 9:12 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/28/2021 9:12 AM	Rate (0)
jabbi_king Bronze Member Joined: 1/26/2014 Last visit: 8/16/2025 Posts: 164 Rating: (0)	I have installed simatic PCS7 V9SP1. Want to backup of Wincc trends file. Can i save backup file and later on i retrieve on the system. Please tell the procedure

Suggestion To thank Quote Answer

8/30/2021 9:42 AM	Rate (0)
schufri Gold Member Joined: 10/10/2014 Last visit: 12/8/2025 Posts: 1725 Rating: (211)	Hi jabbbi_king, look at follow FAQ: In WinCC, how can exported archive segments of Alarm Logging or Tag Logging be connected/removed in Runtime? https://support.industry.siemens.com/cs/ww/en/view/40347325 Best regards schufri

Suggestion To thank Quote Answer

8/30/2021 1:46 PM	Rate (0)
TechnoBlaze Posts: 198 Rating: (60)	Hello Jabbi, Your question is not very clear. If I understood right, you want to back up your trend groups in your OS server or OS Client. If these are Online trend group configurations(created from the buttons in WinCC), the trend files are stored in the 'TRG' folder inside the WinCC project. The same can be equalized or backed up if necessary. If you are talking about the trend controls included in graphic designer, you can double click on the 'Trend control' in the picture, go to Toolbar tab -> Enable ticks for 'Connect Backup' , 'Disconnect Backup'. Click on connect backup, to browse and select the respective segment which is archived.
TechnoBlaze Posts: 198 Rating: (60)	Last edited by: TechnoBlaze at: 08/30/2021 13:52:33
Suggestion To thank Quote Answer

8/30/2021 4:28 PM	Rate (0)
jabbi_king Bronze Member Joined: 1/26/2014 Last visit: 8/16/2025 Posts: 164 Rating: (0)	TechnoBlaze Hello Jabbi, Your question is not very clear. If I understood right, you want to back up your trend groups in your OS server or OS Client. If these are Online trend group configurations(created from the buttons in WinCC), the trend files are stored in the 'TRG' folder inside the WinCC project. The same can be equalized or backed up if necessary. If you are talking about the trend controls included in graphic designer, you can double click on the 'Trend control' in the picture, go to Toolbar tab -> Enable ticks for 'Connect Backup' , 'Disconnect Backup'. Click on connect backup, to browse and select the respective segment which is archived. Dear TechnoBlaze Please clear one point, if i tick the Backup active im the Tag logging properties. How much Backup saved in the desired location?? When overwrite file start.

Suggestion To thank Quote Answer

8/30/2021 4:32 PM	Rate (0)
jabbi_king Bronze Member Joined: 1/26/2014 Last visit: 8/16/2025 Posts: 164 Rating: (0)	Thanks Dear. Now my backup started. Mistake was that path was not corrected. Please guide through this backup how much the period of file we saved?? It depends upon located path size or what?? schufri Hi jabbbi_king, look at follow FAQ: In WinCC, how can exported archive segments of Alarm Logging or Tag Logging be connected/removed in Runtime? https://support.industry.siemens.com/cs/ww/en/view/40347325 Best regards schufri

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on