Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Problem with license key

Created by: Atn at: 3/16/2009 10:32 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/16/2009 10:32 AM	Rate (0)
Atn Experienced Member Joined: 2/20/2009 Last visit: 2/13/2025 Posts: 21 Rating: (0)	I'v finished testing a project in wincc7.0 runtime but when i was transfering the license keys back to the USB-Falsh one of them is not going back. License manager displays a message that this key is still in use. I'v tryed to close all applications and processes linked to the wincc and simatic net - without result. License key is named "industrial ethernet softnet-s7 basis". Any ideas? Attachment Screenshot.jpg (95 Downloads)

Suggestion To thank Quote Answer

3/16/2009 5:34 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Have you tried after rebooting?
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

3/17/2009 7:17 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 12/9/2025 Posts: 2957 Rating: (243)	Hi, Try to write reset_wincc.vbs in Start->Run. This should help.
	Best regards, Darius
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on