Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Periodic counting with CPU 313C

Created by: brzAA at: 4/23/2009 6:10 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/23/2009 6:10 PM	Rate (0)
brzAA Advanced Member Joined: 2/28/2008 Last visit: 1/8/2026 Posts: 35 Rating: (2)	Hello everybody, Need to do periodic counting with the counter module of CPU313C. For my application I choosed the configuration "Main count direction: Up" (according to manual CPU 31xC Technological Functions) . So in this case the counter jump to "load value" when reaching the "end value". It's also said in the manual that the "end value" is configurable. The question is how because it is not accessible in the hardware config. And in the table of available JOB_ID (parameter of SFB COUNT) I don't see any corresponding ID value. Unfortunately I don't have the material to do test before the commissioning. So if somebody can help would be nice... Many thanks for the attention. BR

Suggestion To thank Quote Answer

4/24/2009 11:18 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/16/2026 Posts: 9105 Rating: (1204)	Dear brzAA, In hardware configuration you double click on 'Count'. Because you have selected 'Count periodically' there is a new tab 'Count' Here you can change 'End Value' Best regards, Wizard

Suggestion To thank Quote Answer

4/24/2009 1:10 PM	Rate (0)
brzAA Advanced Member Joined: 2/28/2008 Last visit: 1/8/2026 Posts: 35 Rating: (2)	Dear Wizard, Thanks for your post. I just don't understand how I couldn't see it myself... I feel a bit stupid... Anyway thanks again to have spent time on my nut question ! BR

Suggestion To thank Quote Answer

4/24/2009 1:44 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 12/22/2025 Posts: 703 Rating: (98)	sorry, my mistake/misunderstanging friday afternoon, you know
	Last edited by: Sydney at: 4/24/2009 2:39 PM
Suggestion To thank Quote Answer

4/24/2009 1:49 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/16/2026 Posts: 9105 Rating: (1204)	Dear brzAA, You are welcome ps.: There are no stupid questions Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on