Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

ISSUE ON IEC61850

Created by: hyo_eddie at: 11/6/2022 9:49 PM (6 Replies)

Rating (0)

Thanks 1

7 Entries

11/6/2022 9:49 PM	Rate (0)
hyo_eddie Experienced Member Joined: 12/25/2016 Last visit: 8/29/2025 Posts: 91 Rating: (0)	hi! Anybody can tell me what is the meaning of the encircle on the screenshot? everytime i add some signals in the DIGSI file it showing "i" in the IEC61850. tia Attachment Capture.PNG (539 Downloads)

Suggestion To thank Quote Answer

11/7/2022 2:50 PM	Rate (0)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 9/5/2025 Posts: 16061 Rating: (2513)	When you clicked on the ► to the left of the project tree heading to expand the selection, did that help you in any way? Did you click on that circled icon or at least hover over it to try to discover what it meant? Did you Press F1 (Help) and search for user interface operation to see what all the various components and icons mean? Several options for the mildly curious. hyo_eddie hi! Anybody can tell me what is the meaning of the encircle on the screenshot? everytime i add some signals in the DIGSI file it showing "i" in the IEC61850. tia
	science guy
Suggestion To thank Quote Answer

11/9/2022 8:45 AM	Rate (0)
Mike J Platinum Expert Joined: 10/9/2007 Last visit: 8/18/2025 Posts: 1281 Rating: (116)	Hi it means data on SCD might have changed and you should import it to the Project. Right mouse click and select import.
	Energy Automation products: Sicam, Siprotec, Digsi
Suggestion To thank Quote Answer

11/9/2022 8:25 PM	Rate (0)
hyo_eddie Experienced Member Joined: 12/25/2016 Last visit: 8/29/2025 Posts: 91 Rating: (0)	I tried to follow your instructions but import is not available as shown in screenshot. Attachment SCREENSHOT.jpg (486 Downloads)

Suggestion To thank Quote Answer

11/9/2022 8:44 PM	Rate (0)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 9/5/2025 Posts: 16061 Rating: (2513)	I did a quick online search. First link came back with this: https://cache.industry.siemens.com/dl/files/201/109770201/att_994358/v1/SysConHelp_en.pdf Open that manual, jump to page 84 where it describes various ways to import data. hyo_eddie I tried to follow your instructions but import is not available as shown in screenshot. Attachment SysConHelp_en.pdf (1051 Downloads)
	Last edited by: Jen_Moderator at: 11/10/2022 05:34:07 PDF attached from link. science guy
Suggestion To thank Quote Answer

11/10/2022 9:38 AM	Rate (0)
Mike J Platinum Expert Joined: 10/9/2007 Last visit: 8/18/2025 Posts: 1281 Rating: (116)	Hi I recommend you talk to the colleague who created the project or contact your local Siemens partner. You may delete or loose your IEC61850 configuration if you import the wrong file. Normally in this case we would export data, check in IEC61850 Station and import back again. But you must be sure that the SCD file is the correct one, the path is correct etc. And create a complete backup before doing anything.
	Energy Automation products: Sicam, Siprotec, Digsi
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users 0_Einstein

11/13/2022 8:52 PM	Rate (0)
hyo_eddie Experienced Member Joined: 12/25/2016 Last visit: 8/29/2025 Posts: 91 Rating: (0)	Hi! Thanks for the reply. One more question. Is there anyway i can recover the IEC61850 file? How do i know my IEC61850 which i have in my laptop is the one downloaded to the device? Can i compare the IEC61850 file which i have in my laptop and which is downloaded to the device?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on