Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Master CPU change to STOP mode when slave station down

Created by: hanhdn at: 5/5/2009 6:23 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/5/2009 6:23 AM	Rate (0)
hanhdn Posts: 20 Rating: (0)	Dear all! Inour PLC system, it has a problem which i can not fixed, please help me to solve this problem. Master is CPU317-2DP, and with about 18 slaves is working in Profibus-DP network, which are from different manufacturers Siemens, ABB,.... I define I/O address for these slaves by PI (PIW, PID,..), and PQ (PQI, PQD,...). I also add OB82, OB85, OB86 for master CPU when IM module (do notuse Image address) down the master still run, but "BF" led is on. But, when the slave use PI or PQ address down, CPU change to "STOP" mode, I do not know why, please help me! Thanks you very much
hanhdn Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

5/5/2009 6:54 AM	Rate (0)
Arunakat1 Posts: 217 Rating: (52)	Hi, I think you have to download OB 122 modular error (I/O acess error). The CPU goes to stop mode because it can’t access failed slave’s I/O. Best regards. Also see this link. /tf/WW/en/Posts/29044#top
Arunakat1 Posts: 217 Rating: (52)	Last edited by: Arunakat1 at: 5/5/2009 6:59 AM
Suggestion To thank Quote Answer

5/5/2009 7:13 AM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Hello, You could find more info about OBs into follow FAQ: Which organization blocks do you need for error handling? Best regards Hristo Mihalev

Suggestion To thank Quote Answer

5/5/2009 11:21 AM	Rate (0)
Ayman Elotaify Diamond Expert Joined: 5/28/2008 Last visit: 1/14/2026 Posts: 4522 Rating: (843)	Hello, After you will create the OB that corresponds to the errors. In case of error occured the CPU will call the corresponding OB and the SF led will be ON. And the CPU will remain in Run mode.
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on