Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Does OLE Objects only support *.bmp files?

Created by: jthyge1 at: 2/23/2023 1:59 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/23/2023 1:59 PM	Rate (0)
jthyge1 Advanced Member Joined: 2/28/2008 Last visit: 1/23/2026 Posts: 326 Rating: (6)	Hi Does OLE Objects only support .bmp files in WinCC Report Designer? I am not able to insert .jpg or '.png pictures. When I insert .jpg or .png, only icons are shown. Both in designer and in print. ------------------------------------------------------------------------------------------ Split from How to input image at WinCC report designer?.
	Last edited by: jthyge1 at: 02/24/2023 07:14:16 Last edited by: Jen_Moderator at: 02/24/2023 07:56:40 New subject after splitting Last edited by: jthyge1 at: 02/27/2023 06:17:11
Suggestion To thank Quote Answer

3/1/2023 11:57 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 1/23/2026 Posts: 16661 Rating: (1944)	Hello jthyge1 I think there is no Jpg in the List of possible PLE Objects. Whats you usecase, do you only want to insert a jpg as graphic in the Report? Try with Metafile or convert the graphics -> which WinCC Version do you use? bye Murof
	Last edited by: Murof at: 03/01/2023 11:57:31 If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

3/2/2023 6:28 AM	Rate (0)
jthyge1 Advanced Member Joined: 2/28/2008 Last visit: 1/23/2026 Posts: 326 Rating: (6)	Hi Murof I am using WinCC 7.5 SP2 Update 12 Yes, it is only for graphics. It i primarliy for the transparent .png bagground. / Jesper

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on