Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Want to directly use an internal label for report in wincc

Created by: majid_rajabi19 at: 6/28/2023 6:23 AM (4 Replies)

Rating (1)

Thanks 0

5 Entries

6/28/2023 6:23 AM	Rate (0)
majid_rajabi19 Posts: 10 Rating: (0)	I want to directly use an internal label for my report in wincc software. When I assign the tag, the tag name is printed instead of the current tag value. Please someone guide me ------------------------------------------------------------------------------------------ Split from custom reports.
majid_rajabi19 Posts: 10 Rating: (0)	Last edited by: Jen_Moderator at: 06/28/2023 11:36:53 New subject after splitting
Suggestion To thank Quote Answer

6/29/2023 11:36 AM	Rate (1)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 9/11/2025 Posts: 16400 Rating: (1935)	Hello majid_rajabi19 Yes the tag object in the layout designer shows the name of the Tag, but in RUntime or if you execute the report there will be written the current value Do you have already tried to run the report in Runtime? Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

7/2/2023 3:03 AM	Rate (0)
majid_rajabi19 Posts: 10 Rating: (0)	For the first time, I want to prepare a report from wincc program, can you help me? I have two problems now 1- Preparing a report using the button I made on the desired page. 2- Direct use of the internal tag in the layout The problem is that I assigned the inner tag to the layout page and took the program to runtime, but instead of the current tag value, it prints the tag name directly from the page.
majid_rajabi19 Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

7/3/2023 5:17 AM
majid_rajabi19 Posts: 10 Rating: (0)	For the first time, I want to prepare a report from wincc program, can you help me? I have two problems now 1- Preparing a report using the button I made on the desired page. 2- Direct use of the internal tag in the layout The problem is that I assigned the inner tag to the layout page and took the program to runtime, but instead of the current tag value, it prints the tag name directly from the page.
majid_rajabi19 Posts: 10 Rating: (0)
Suggestion Quote Answer

7/7/2023 7:37 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 9/11/2025 Posts: 16400 Rating: (1935)	Hello majid_rajabi19 Create a Layout-> create a printjob-> go to runtime-< select the printjob in the WInCC explorer and rightclick -> preview Printjob Then you can see ho the report will look like if you execute it in runtime. If you want to print a Printjob on a Button use the C Script function RPTJobPrint -> I tested it with an internal tag and the report shows me the VALUE of the tag not the tagname in Runtime if I execute or preview the printjob. only in report designer the tagname is shown that you know which tag is connected to the control Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on