Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

OPC WINCC

Created by: stefy's at: 6/22/2009 10:12 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/22/2009 10:12 AM	Rate (0)
stefy's Posts: 30 Rating: (0)	Hello everyone, In my factory it will be implemented an informatic sistem "MES"(manufacturing execution system). How canI configured the OPC client from WINCC to export data to a higher level without install add software? Can do this or is necessary to install an add software to WinCC? Please answermy question... A good to everyone.
stefy's Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

6/22/2009 10:34 AM	Rate (0)
rit03 Posts: 341 Rating: (24)	See the following FAQ for WinCC OPC connection http://support.automation.siemens.com/WW/view/en/22892718 regards, rit03
rit03 Posts: 341 Rating: (24)
Suggestion To thank Quote Answer

6/22/2009 6:08 PM	Rate (0)
CBo Gold Member Joined: 4/5/2006 Last visit: 10/3/2025 Posts: 917 Rating: (63)	Hi stefy, you can find information in "WinCC Information System", look in section Interface--> OPC - Open connectivity Here you can find other add-on also but them need separate SW and license. Anyway, OPC is good to exchange data, but not a big database... Hope can help you a lil Regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on