Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Problem with OP47 (ACK Button)

Created by: TSM at: 6/22/2006 6:10 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/22/2006 6:10 PM	Rate (0)
TSM Posts: 4 Rating: (0)	Hi! I havesome OP47 with WinCC 4.01 having problem with the Acknowledge Button. When this button is pressed, the OP47 recognize that another button was pressed and starts another application (e.g. The motor is started when the ACK button is pressed!). I'd like tofind a solution for this problem, but I don't know how the WinCCverifies what button was pressed, I think the program that checks it must be inside theGlobal Script, but many functions is protected by password! Can anyone help me? Remarks: I am talking about the phisycal button, not the virtual buttons inside the program. The OP47 communicates with Simadyn D Control System. Thanks, Tiago
TSM Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/23/2006 10:11 AM	Rate (0)
Nemo Posts: 3149 Rating: (172)	Hi, perhaps this document for a PC670 can give some hints??? Your system is unfortunately a little bit older, so infos are quite rare.... nemo Attachment old_faq.pdf (511 Downloads)
Nemo Posts: 3149 Rating: (172)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on