Navigation

LOGO8.4 - KTP400 Basic

Created by: AutoGen_8356048 at: 12/13/2024 8:24 AM (1 Replies)

12/13/2024 8:24 AM	Rate (0)
AutoGen_8356048 Member Joined: 6/16/2022 Last visit: 12/29/2025 Posts: 1 Rating: (0)	Hi! Want to be able to write/display a negative value in a Siemens KTP400 to use in a LOGO 8.4. Ex. Start an electric heating coil at -4 degrees C (or whatever value you choose to enter). Or show current outside temp (which can be -30 degrees C) Is it even possible as LOGO as far as I understand can only use Word as a variable? By the way I am a beginner

Suggestion To thank Quote Answer

12/13/2024 8:29 AM	Rate (1)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 1/20/2026 Posts: 36489 Rating: (4552)	Use in the tag table in TIA not the data type Word but the data type Int.

Suggestion To thank Quote Answer