Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

MP277 Configruation File Too Large

Created by: Valiant_Patty at: 11/16/2009 2:44 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/16/2009 2:44 PM	Rate (0)
Valiant_Patty Regular Member Joined: 2/27/2008 Last visit: 1/5/2022 Posts: 11 Rating: (1)	Hello all, I have an issue with a program that I'm trying to download to an MP277 HMI. I keep getting the error that the "Configuration File is Too Large Downloading will be aborted" when trying to transfer to the HMI. I am using WinCC Flex 2007 and the MP277 is a touch screen. I have tried Deleting the Temporary Files and this worked for a bit but now nothing works. I haven't added many things to the program so I'm not sure if I'm on the bubble or if something is wrong with my HMI. How can I fix this or how can I check the size of the configuration file? Thanks.

Suggestion To thank Quote Answer

11/17/2009 3:48 PM	Rate (0)
The Brain Posts: 1611 Rating: (121)	Hi, it is possible that youuse the Option "Enable back transfer" under the transfer settings? regards,
The Brain Posts: 1611 Rating: (121)
Suggestion To thank Quote Answer

11/17/2009 5:08 PM	Rate (0)
Valiant_Patty Regular Member Joined: 2/27/2008 Last visit: 1/5/2022 Posts: 11 Rating: (1)	I just found out that the MP277 only holds a little over 6MB and that my file is over that size. When compiling I now watch the file size to determine if it will fit on the HMI. I never thought that my program would have been this large.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on