Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Redundancy for WinCC

Created by: alexfizeau at: 3/29/2007 10:07 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/29/2007 10:07 AM	Rate (0)
alexfizeau Posts: 95 Rating: (0)	Is there any kind of redundancy with WinCC? I mean, I can have a network of two computers with WinCC on them, in two situations: 1. both are running with the same data (display & control) 2. one is running and the other is in stand-by, when something happens with the one that is running, the second computer takes the information and continues the process control. Or I can have an engineering station and an operator station, each running with the data for process control that I configure ? Many thanks.
alexfizeau Posts: 95 Rating: (0)
Suggestion To thank Quote Answer

3/29/2007 11:09 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, have a look at the documentation with the Link http://support.automation.siemens.com/WW/view/en/21320307 Best regards April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on