Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Can´t upload or save program

Created by: Rajit at: 1/8/2013 5:59 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/8/2013 5:59 AM	Rate (0)
Rajit Experienced Member Joined: 8/8/2012 Last visit: 10/9/2025 Posts: 6 Rating: (0)	hi i am trying to upload s7 1200 FROM A USA MADE MACHINE BUT AS SOON AS I START UPLOADING THE PROGRAM THE PROGRAM STARTS UPLOADING BUT THE UPLOADING GOES BEYOND 20-22 MINUTES AND THEN TIA GIVES THE ERROR TORESTART OR CLOSE. I HAVE TIA V 11 SP2 UPDATE 4 AND THE PLC ALSO HAVE A MEMORY CARD. I AM ABLE TO VIEW THE BLOCKS ONLINE IN ACCESSIBLE NODES BUT CANT UPLOAD OR SAVE THE PROGRAM. PLEASE HELPME ON THIS AS SOON AS U CAN. RACHITSHARMA
	Last edited by: O_Moderator at: 1/8/2013 9:05 AM new subject after splitting from /tf/WW/en/Posts/66728#top
Suggestion To thank Quote Answer

1/8/2013 6:16 AM	Rate (0)
Rajit Experienced Member Joined: 8/8/2012 Last visit: 10/9/2025 Posts: 6 Rating: (0)	IF MMC DIP SWITCH IS ON ,CAN WE UPLOAD THE PROGRAM FROM S7 1200. OR WHAT ARE THE MORE PROTECTION FEATURES WHICH PREVENTS FROM UPLOADING A PROGRAM FROM CPU. RACHIT

Suggestion To thank Quote Answer

1/11/2013 5:41 AM	Rate (0)
Rajesh_s Experienced Member Joined: 10/20/2011 Last visit: 12/12/2024 Posts: 102 Rating: (3)	Hello, Rajit Please check weather the write protection is enable.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on