SICAM PAS Auth Comand

Dear All,

i have 3 Full Server for 3 different voltage level in two different NW,

- Voltage Level 1 --> FS1 ---> NW1 -----\\\\\
- Voltage Level 2 --> FS2 ---> NW2 ----- >>>> connected to HMI1 "SICAM PAS CC"
- Voltage Level 3 --> FS3 ---> NW3 -----/////



in SICAM PAS Configuration, I can only map only 1 control authority for 1 voltage level (say FS1), even if i map the control authority in FS2 & 3, still they will not appear in HMI Tag (only the for FS1 will appear) my only option i can think of is to bypass the command (Control Authority) from FS1 to 2 & 3 by using OPC Server.

My question is how to implement that in SICAM PAS, can you give me an example. Also is there any reference recommended for SICAM PAS OPC

thanks

Mike J

Hi

if you have 3 Fullservers in SCC you also have 3 keys for the control authority.

If you want all keys to work together, you can control this with SCC or using OPC between PAS.


Mike

Thanks

actually I mapped the control authority of the 3 server and all 3 servers have a common name for the control center. Now when I export the PXD File and import it via SICAM PAS CC Wizard, the control center tag will only appear in the first FS of voltage level 1.

Is it possible to assign separate control center name

is there any reference / manual I can refer to know how I use the OPC between the PAS?

Thanks

fanana

hii

i can suggest something ,but i am not sure .

you can create more than station in the wincc explorer using sicam wizard ,

each control center with station ,

please give us feed back