Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Read tags in web server

Created by: syd_b at: 10/16/2013 12:09 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

10/16/2013 12:09 AM	Rate (0)
syd_b Bronze Member Joined: 2/3/2011 Last visit: 6/10/2025 Posts: 348 Rating: (10)	I´ve been practicing with 1511. I notice that it has a web server, in the user management access level is showed a list with authorizatons. The issue is the I can´t activate read tags, write tags, acknowledge alarms. How can I enable this options? Thanks.

Suggestion To thank Quote Answer

10/16/2013 7:01 AM	Rate (0)
Nelliyan randy Posts: 461 Rating: (29)	This link will give u a solution Regards, Nelliyan.G
Nelliyan randy Posts: 461 Rating: (29)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users billwest

10/17/2013 11:02 PM	Rate (0)
syd_b Bronze Member Joined: 2/3/2011 Last visit: 6/10/2025 Posts: 348 Rating: (10)	Thanks for the info, but then isn´t possible to view the standard web pages(diagnostic buffer, variable status)fromS7-1500 like in S7-1200??

Suggestion To thank Quote Answer

10/18/2013 6:26 AM	Rate (0)
Nelliyan randy Posts: 461 Rating: (29)	yes u can view the standard pages by just browsing ur plc ip in browser..If u need user defined pages then u have to create scripts..try login with admin as username ,,no need for pwd if havent created any... For viewing diagnostics buffer c img 3 & for variable status c img 4 in the link provided in previous post.. Regards, Nelliyan.G
Nelliyan randy Posts: 461 Rating: (29)	Last edited by: Nelliyan randy at: 10/18/2013 6:29 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on