Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Updating TIA Portal V11 SP1 (solved)

Created by: Lamboom at: 8/10/2014 12:17 AM (14 Replies)

Rating (4)

Thanks 3

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

8/10/2014 10:40 PM	Rate (0)
William_B Posts: 5225 Rating: (1204)	Lamboom Ya know, if the basic procedure above is correct.. why couldn't Siemens just say to do it that way Micheal, We can't blame Siemens for this one. The procedure is written up somewhere.. I am sure you'll find it if you looked. We can't expect to have the procedure spelled out every time there is an update fo software. Those of us that has done this plenty of times has forgotten where we were first told of this. Don't worry.. move on and go create some PLC magic! w
William_B Posts: 5225 Rating: (1204)
Suggestion To thank Quote Answer

8/11/2014 12:44 AM	Rate (0)
Lamboom Posts: 90 Rating: (0)	William... FYI Total success... upgraded from SP1 to SP2, then installed update 5 for TIA, Step & WinCC. And catalog had all the stuff i neded .. like SM 1223 (DC/DC) .. I'm wondering why I can't include the eithernet switch CSM1277 .. be nice to include that in network view... but, perhaps that isn't necessary. Only thing I need now, is to figure out how to close this thread .. as solved ... :-)
Lamboom Posts: 90 Rating: (0)	Last edited by: Lamboom at: 8/11/2014 12:45 AM
Suggestion To thank Quote Answer

8/11/2014 9:22 AM	Rate (0)
William_B Posts: 5225 Rating: (1204)	Lamboom William... FYI Total success... upgraded from SP1 to SP2, then installed update 5 for TIA, Step & WinCC. And catalog had all the stuff i neded .. like SM 1223 (DC/DC) .. I'm wondering why I can't include the eithernet switch CSM1277 .. be nice to include that in network view... but, perhaps that isn't necessary. Only thing I need now, is to figure out how to close this thread .. as solved ... :-) Good to hear you news. Thank you for the feedback. I suggest you EDIT the first post of this thread. You can then edit the title of the thread. Maybe have someting like "(SOLVED)" in frint of the title. w
William_B Posts: 5225 Rating: (1204)
Suggestion To thank Quote Answer

8/11/2014 5:55 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 9/5/2025 Posts: 16060 Rating: (2513)	Lamboom William... FYI Total success... upgraded from SP1 to SP2, then installed update 5 for TIA, Step & WinCC. And catalog had all the stuff i neded .. like SM 1223 (DC/DC) .. I'm wondering why I can't include the eithernet switch CSM1277 .. be nice to include that in network view... but, perhaps that isn't necessary. Only thing I need now, is to figure out how to close this thread .. as solved ... :-) To make the CSM1277 appear in the network, go to the topology view and drag in the csm1277 from the list of devices. Then you can make your device connections that show the csm1277.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users William_B Lamboom

8/11/2014 9:42 PM	Rate (0)
Lamboom Posts: 90 Rating: (0)	WoW! Thanks Huggy!
Lamboom Posts: 90 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

|

Share this page:

Share this page on...

Follow us on