Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

alarm acknowledge in WinCC- Step7

Created by: sbc at: 2/22/2008 10:34 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/22/2008 10:34 AM	Rate (0)
sbc Posts: 17 Rating: (1)	Hi, I have a project in Step7 with WinCC integrated. I have used Alarm_8p to send alarm message to winCC. I need to acknowledge this alarms from WinCC and from the PLC, so I need to configure the Acknowledgement Tag in WinCC.Is there any way to configure thisAcknowledgement Tag in the Step7, which will be send to WinCC when I compile the OS?. Thanks in advance, SBC
sbc Posts: 17 Rating: (1)
Suggestion To thank Quote Answer

2/29/2008 8:54 AM	Rate (0)
ateam Posts: 170 Rating: (26)	hi sbc, i believe it's not possible to use acknowledgement tag in alarm_8p messages. The acknowledgement tag is already used by the "#RawEvent"-Tag .
ateam Posts: 170 Rating: (26)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on