Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Wincc - SFC display

Created by: tom.t. at: 6/25/2008 12:25 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/25/2008 12:25 PM	Rate (0)
tom.t. Member Joined: 6/25/2008 Last visit: 10/6/2025 Posts: 5 Rating: (0)	Hello, I am lookign for the way to permanently display on one side of the HMI sceen one SFC shéma with fixed window area dimensions. Not using separate window. Does somone already done it?
	Software Engineer
Suggestion To thank Quote Answer

6/30/2008 1:08 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, i think you have no possibility to do this. You must use a separate window.
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

6/30/2008 5:21 PM	Rate (0)
tom.t. Member Joined: 6/25/2008 Last visit: 10/6/2025 Posts: 5 Rating: (0)	Hi At least I did not found any way to do this. I made one automatic call of the SFC window each time you acces on the concerned page. I managed to fix the position on the screenbut the window size is allways minimum at opening. Do anybody know the way to fix the SFC separate window size at oppening ? I am using the folowing function : ... SSMGetWorkFieldCoordinates(SSMGetScreen(IpszPictureName),&left,&top,&width,&hieght); SFCOpenSection(szFullDmVarName, left+50,top+10,500,600,(void*)0); ... This function only limit the manual resize to 500/600. Thanks in advance
	Last edited by: tomat at: 6/30/2008 5:22 PM Software Engineer
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on