Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Wincc 6.0 error

Created by: saleem hyderabadi at: 5/23/2008 6:51 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/23/2008 6:51 PM	Rate (0)
saleem hyderabadi Posts: 1 Rating: (0)	Hello, I am new to siemens world. And I need this forum's strong support. I recently installed WIncc v6.0. But when wanted to create a new project, I received an error dialog box saying "HResult error" 0x80046127 : (null) and then saying " project could not be created". What is the solution. Thanks.
saleem hyderabadi Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/23/2008 7:06 PM	Rate (0)
billwest Posts: 510 Rating: (120)	The problem may be with the SQL security mode. check out this link: http://support.automation.siemens.com/WW/view/en/19439600 Bill
billwest Posts: 510 Rating: (120)
Suggestion To thank Quote Answer

8/28/2008 2:54 PM	Rate (0)
Palmerita Posts: 102 Rating: (13)	Hello people... I know this is an old problem, but it gave me a very good headache during the last days, so I will share my own experience I also had this 0x80046127 NULL problem, but in my case, I did not change any passwords nor any sql configuration... I could create new projects and afterwards close them, modify them and then agian re-open them without any problem, but notopenany old project... So I did not think that a SQL re-installation would be an option... But yes it is, I dont know why or how, but after re-installing SQL my problem was solved!!!! I just wanted to share it with you, because I saw it was kind of a problematic discussion, so maybe someone could find this tip useful...
Palmerita Posts: 102 Rating: (13)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on