Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Horn Designer Doesnt Work Runtime Computer

Created by: candyengineer at: 7/8/2008 10:56 AM (6 Replies)

Rating (1)

Thanks 0

7 Entries

7/8/2008 10:56 AM	Rate (0)
candyengineer Posts: 218 Rating: (26)	Hi SIEMENS forum members, I've created simple internal bit and then add it to horn designer. Secondly, I reset with acknowledgment button. Horn works on the computer which I design my project. When I copy the project to other computer Unfortunetely it doesnt work on the runtime computer Thanks in advance, Best regards Attachment 1.JPG (136 Downloads)
candyengineer Posts: 218 Rating: (26)
Suggestion To thank Quote Answer

7/8/2008 9:17 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hello My Friend, I noticed from the screenshot that the wav file ding.wav is not in the usual project path. Does this wav file exist in the proper folder on the runtime computer? Also, try to monitor the internal tag SIGNAL on the runtime machine when alarm is triggered. Regards, Phantom
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

7/9/2008 8:13 AM	Rate (0)
candyengineer Posts: 218 Rating: (26)	Thank you very much my friend , I think the horn is not working at runtime computer, because it doesnt trigger the bit. I also check the wav file, it exists, too. Maybe its something different... Thank you for your help Best regards
candyengineer Posts: 218 Rating: (26)
Suggestion To thank Quote Answer

7/9/2008 1:38 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, have you seen this FAQ http://support.automation.siemens.com/WW/view/en/17778088
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

7/9/2008 4:12 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	candyengineer ... I reset with acknowledgment button... Can you disable this and try. Also, try after removing the Output 1 from the Signal Module field. Your runtime project is a OS single station or a MC? The FAQ by April is good. The online help is also good especially "Minimum Horn Configuration". Regards.
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

8/11/2008 2:40 PM	Rate (0)
candyengineer Posts: 218 Rating: (26)	Hello Phantom , I tried all you suggest, removing ack , removing output1 ... There is still something I missed,,, My project is single station. I checked other station, it calls for the horn at the activating time, nothing happens. Thanks in advance , Best regards
candyengineer Posts: 218 Rating: (26)
Suggestion To thank Quote Answer

9/5/2008 8:45 PM	Rate (1)
Phantom75 Posts: 2661 Rating: (279)	Dear Candy, I tried this with a test project on my PCS7 V7.0 SP1 (WinCC V6.2 SP2) system and it works. PM your email and I could send you the test project for comparison Regards, Phantom75
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on