Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How to control outputs while the CPU is in stop mode?

Created by: Ayman Elotaify at: 9/14/2008 9:41 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/14/2008 9:41 AM	Rate (0)
Ayman Elotaify Diamond Expert Joined: 5/28/2008 Last visit: 1/14/2026 Posts: 4522 Rating: (843)	If you want to energize certain digital output or freeze these outputswhile the CPU is in stop mode, from the micro Win, SelectSystem block/ Output tables. Then you would see that you can Freeze outputs in last state or you can mark the outputs which you want to be energized from a table. Attachment outputs%20in%20stop%20mode.JPG (307 Downloads)
	Last edited by: Ayman Elotaify at: 9/15/2008 9:29 AM Ayman Elotaify
Suggestion To thank Quote Answer

9/15/2008 12:01 AM	Rate (0)
neo Posts: 264 Rating: (59)	Hello Ayman, I also think´s thats a good function,i also had use for that in an application best regards..
neo Posts: 264 Rating: (59)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on