connecting Logo 0ba8 to KTP1000 PN Basic HMI device

connecting Logo 0ba8 to KTP1000 PN Basic HMI device

Hello everyone

I am an automation and robotic student and i am doing an internship in wich my mission is to make a data visualisation and data logging interface for an industrial electric oven commanded with a logo 0ba6.

For technlogical purposes the comagnie choosed to replace the 0ba6 with a 0ba8 and i am in charge of connecting it to an HMI.

I proposed to use the KTP1000 PN Basic HMI device but i am not sure of my choice due to my lack if experience, i would like to have some advices.

I am also wondering about the profinet protocol that i have never used before (i am more specialised in micro-controllers)

please fogrive my grammar mistakes i am still working on improving my english

Thank you for reading

Sorry for the time it took me to answer you.

At the time i was using V12, but now that i have purshased the ktp 1200 PN i will start using v15 

if you have an exemple it would be perfect

Thank you