Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

HW config compile issue with safty 5.4

Created by: pigroplc at: 10/14/2008 1:47 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/14/2008 1:47 PM	Rate (0)
pigroplc Bronze Member Joined: 4/3/2008 Last visit: 11/16/2025 Posts: 392 Rating: (16)	I'm facing this condition: I have a lot of machines all over the world with 315F-2DPand ET200M with safety module: 6ES7 153-1AA03-0XB0 profibus interface 6ES7 326-1BK00-0AB0 safe input 6ES7 326-2BF01-0AB0 safe output compiled with S7 Distributed Safety V5.3 and I never had problems downloading the hardware configuration. Step7 V5.4 SP3 released used. Now I've been upgrated to S7 Distributed Safety V5.4 SP4 and I can't compile again due to the following errorr: ======================================================================= Save and Compile (1129:2104):The F module 6ES7 326-2BF01-0AB0 [bus node address 6] needs a redundant IM 153-2 as head module. Save and Compile (1129:2104):The F module 6ES7 326-1BK00-0AB0 [bus node address 6] needs a redundant IM 153-2 as head module. Save and Compile (1230:3000):The system data could not be recreated because the configuration is inconsistent. ======================================================================= Now for the new equipment there is no problem due to the new interface ordered, but for the old machine requiring changes I have to downgrade the S7 Distributed Safety to V5.3 and in the same PC I have to configure the new interface with S7 Distributed Safety V5.4 SP4. it there anybody having a smarter idea? I don't want to keep of updating/downgrating software or turn around the world with a couple of PC depending on the IM153......... thanks pigroplc

Suggestion To thank Quote Answer

10/24/2008 2:42 PM	Rate (0)
pigroplc Bronze Member Joined: 4/3/2008 Last visit: 11/16/2025 Posts: 392 Rating: (16)	I can suppose there is no way to fix the bug..... Thank you pigroplc

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on