Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Close face plates with scripting

Created by: labbit22 at: 11/3/2008 10:00 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/3/2008 10:00 PM	Rate (0)
labbit22 Posts: 2 Rating: (0)	Hello all. I was sent this scripting by a Siemens guy in Ontario Canada. This can open up multiple faceplates as long as they are located on that page. It is on mouse action for a button. // Calls up first faceplate lpszObjectName = "@ C1_042A"; PCS7_OpenGroupDisplay_V6(lpszPictureName, lpszObjectName); // Calls upsecond faceplate lpszObjectName = "@ C1_043A"; PCS7_OpenGroupDisplay_V6(lpszPictureName, lpszObjectName); This works fine. What I would like to know is if there is scripting to close these or other multiple face plates without having to click on the "x" in the top right corner? thanks
labbit22 Posts: 2 Rating: (0)	Last edited by: labbit22 at: 11/3/2008 10:02 PM
Suggestion To thank Quote Answer

11/4/2008 11:51 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, see the script in this FAQ http://support.automation.siemens.com/WW/view/en/16650946
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

11/4/2008 7:45 PM	Rate (0)
labbit22 Posts: 2 Rating: (0)	That has a button inside the faceplate. In my situation, I have a button on a main page that opens a pop up window(pdf)(direct connection), opens a face plate or multiple faceplates(scripting) and makes another button visible(direct connection). All of these are arranged so that they appear to be one pop up. This button that becomes visible, closes the pop up pdf(direct connection), makes itself not visible(direct connection)and now I need it to close the faceplate(s). Via scripting I assume?? Thanks
labbit22 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on