Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Logo with hmi connection disconnected

Created by: JorisMullenders at: 11/22/2019 10:37 AM (14 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

11/23/2019 8:39 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	In your screenshot of the message window is displayed a "LOGO Bovengebled Sauna" with the IP address 192.168.3.160. In your uploaded LOGO! Project there is this LOGO! not.

Suggestion To thank Quote Answer

11/23/2019 8:54 AM	Rate (0)
JorisMullenders Regular Member Joined: 4/21/2016 Last visit: 2/10/2025 Posts: 12 Rating: (0)	There is. but the problem started with LOGO LV7. the otherone was added yesterday. but i think it is because its at is maximum connections then? Attachment screenshot3.JPG (326 Downloads)

Suggestion To thank Quote Answer

11/23/2019 9:20 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	In the projekt which you have uploaded there is no LOGO! with IP address 192.168.3.160. Attachment Untitled.png (293 Downloads)

Suggestion To thank Quote Answer

11/23/2019 9:27 AM	Rate (1)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	Your screenshot of connections will show that you've created more than 8 connections. You can not use more than 8 connections. If you want to display data from LOGO!s for which you have no connection to the HMI, then you first have to transfer this data into a LOGO! which has a connection to the HMI. That's what the User Scorp means.....

Suggestion To thank Quote Answer

11/23/2019 10:17 AM	Rate (0)
JorisMullenders Regular Member Joined: 4/21/2016 Last visit: 2/10/2025 Posts: 12 Rating: (0)	sorry. my bad. i uploaded the wrong file. okay. i am going to try it thru 1 or 2 LOGO!s. thankyou!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on