Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Overview area and tool bar problem

Created by: Yai at: 11/18/2008 4:44 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/18/2008 4:44 AM	Rate (0)
Yai Posts: 62 Rating: (2)	Hi all, I have a problem about overview area shows nothing and also the toolbar is not respont. Please have a look in the attachment. Actuallly, there is one thread regarding this problemin this forum, but there is no solid solution yet. Anyone experienced before, I would appreciate to know. Thank you. Attachment OverviewAreaProblem.zip (161 Downloads)
Yai Posts: 62 Rating: (2)
Suggestion To thank Quote Answer

11/18/2008 4:45 AM	Rate (0)
Yai Posts: 62 Rating: (2)	Sorry. I am using WinCC 6.0 SP4 with Basic process control on XP Pro. Yai
Yai Posts: 62 Rating: (2)
Suggestion To thank Quote Answer

11/18/2008 3:55 PM	Rate (0)
cumulus Posts: 993 Rating: (103)	hi Is it possible, that you created your picture tree from "Plant Hierarchy", then you has selected the wrong "Os area". Plaese check it: 1. klick at the menübar at "View" > "Plant View" 2. Select one Hierarchie Folder and then klick in the menübar at "options" > "Plant Hierarchie" > "Settings" 3. Select as OS area this, where the pictures are. inyour case area 1 4. complile the OS with "Picture tree", "Entrie OS" and "With memory reset" If that not helps, tell me. Please post the link to the other thread. regards cumulus
cumulus Posts: 993 Rating: (103)
Suggestion To thank Quote Answer

11/20/2008 3:16 AM	Rate (0)
Yai Posts: 62 Rating: (2)	Hi cumulus, My project is only WinCC+Basic process control and I created overview area directly from Picture Tree Manager. I do not use PCS7. Any possible cause? Thank you Yai
Yai Posts: 62 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on