Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Alarm Logging - connect/disconnect archive

Created by: Mike J at: 12/16/2008 4:23 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/16/2008 4:23 PM	Rate (0)
Mike J Platinum Member Joined: 10/9/2007 Last visit: 1/16/2026 Posts: 1295 Rating: (116)	Dear All For WinCC 6.x in Alarm Logging and Tag Logging it's possible to connect old files (MDF) back to database. Question: is it necessary or mandatory that this connected archives are disconnected from database after using them? What if the operator, during one month, connects a lot of old archives back to WinCC? We noticed that after this function was implemented WinCC had some crashes, and before this implementation everything worked fine for 1 year.
	Energy Automation products: Sicam, Siprotec, Digsi
Suggestion To thank Quote Answer

12/17/2008 9:16 AM	Rate (0)
Yai Posts: 62 Rating: (2)	Hi Mike J, Could you show us the diagnostic files? It's will absolutely consume resorce and reduce PC performance, if you linkback a volume of database. However I think perhaps not only this causes your WinCC crashed. Yai
Yai Posts: 62 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on