Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Wincc ethernet communicatin diagnostic

Created by: ercanacar at: 11/9/2017 2:38 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/9/2017 2:38 PM	Rate (0)
ercanacar Posts: 33 Rating: (3)	Hi 1-) I using wincc v7.3 se pro update15 - 4 units mitsubishi fx3u ethernet communication working but when disconnect the any cpu wincc not disconnecting log time I changed the PG/PC interface ethernet card properties, connection monitoring timeout to 1second couldnt understand when I disconnect pc ethernet cable, wincc runtime not disconnecting 1 or two minute 2-) using sistem message 1000024 1000205 connected and disconnected tag. tranfered to internal tag with status tag. when disconnected the plc internal tag change to 1 but when again connect not change to 0. I need when comming 1000204, 1000205 must reset and when coming 1000205, 1000204 must reset
ercanacar Posts: 33 Rating: (3)	Last edited by: ercanacar at: 11/9/2017 8:39:46 PM Last edited by: ercanacar at: 11/9/2017 8:46:24 PM
Suggestion To thank Quote Answer

11/29/2017 12:28 PM	Rate (0)
The Body Posts: 836 Rating: (71)	Hi ercanacar, I would suggest you another way, to solve this problem: How do you implement tag status monitoring or connection status monitoring in WinCC? How do you generate user-defined operator input messages in WinCC?
The Body Posts: 836 Rating: (71)
Suggestion To thank Quote Answer

2/28/2021 1:34 PM	Rate (0)
Javad Golchin Posts: 24 Rating: (1)	ercanacar Hi 1-) I using wincc v7.3 se pro update15 - 4 units mitsubishi fx3u ethernet communication working but when disconnect the any cpu wincc not disconnecting log time I changed the PG/PC interface ethernet card properties, connection monitoring timeout to 1second couldnt understand when I disconnect pc ethernet cable, wincc runtime not disconnecting 1 or two minute 2-) using sistem message 1000024 1000205 connected and disconnected tag. tranfered to internal tag with status tag. when disconnected the plc internal tag change to 1 but when again connect not change to 0. I need when comming 1000204, 1000205 must reset and when coming 1000205, 1000204 must reset I have the same problem: wincc runtime can not understand when I disconnect pc ethernet cable, wincc runtime not disconnecting 1 or two minute or more what statuse register i should check to know cable break?
Javad Golchin Posts: 24 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Communication (OPC, S7, OtherSystem)

Follow us on