Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

LOGO 8 PC to LOGO connection problem

Created by: logofan17 at: 9/30/2016 3:10 PM (24 Replies)

Rating (3)

Thanks 9

25 Entries

Entries per page: 10 | 20 | all

9/30/2016 3:10 PM	Rate (0)
logofan17 Posts: 5 Rating: (0)	Hi Guys. Just bought my first logo for at projekt, and i am having problems connecting the device to my PC I am getting the message that the PC and the target logo is not on the same subnet. I have changed the subnet mask on the logo from 255,255,255,000 to 255,255,000,000 but no combination seems to work. I have also changed the ip adress and default gateway so they match the numbers in my LAN IPv4 settings but i cant find af combination that works...... When i use LOGO soft fort i can see the MAC adress of the LOGO so there are som sort of connection... ????? Hope you can help...... regards Attachment Udklip.PNG (1140 Downloads)
logofan17 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

9/30/2016 3:26 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/7/2025 Posts: 35933 Rating: (4498)	Please give us more informations. Which IP has the PC? Which subnet has the PC? Which IP has the Logo? Which subnet has the Logo?

Suggestion To thank Quote Answer

9/30/2016 4:50 PM	Rate (0)
logofan17 Posts: 5 Rating: (0)	LAN (PC) details IPv4 Adress: 192.168.0.1 IPv4 Subnet mask 255.255.255.0 IPv4 st gatevay : 192.168.0.2 LOGO soft details: IP adress : 192.168.0.1 Subnet mask: 255.255.255.0 Default gate: 192.168.0.2 LOGO unit : IP Adress : 192.168.000.001 Subnet mask: 255.255.255.0 Default gate: 192.168.000.002 Attachment LAN (PC)details.PNG (1319 Downloads)
logofan17 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

9/30/2016 5:03 PM	Rate (1)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/7/2025 Posts: 35933 Rating: (4498)	The Logo has the same IP address as the PC. You must change the IP address of the Logo. The IP address is divided into 4 segments, XXX.YYY.WWW.nnn. The first 3 segments of the IP addresses of PC and Logo must be the same, but the 4th segment must be different. Change the IP address of the logo e.g. in 192.168.000.003. The subnet masks are correct.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Automation Program

9/30/2016 5:54 PM	Rate (0)
logofan17 Posts: 5 Rating: (0)	I have changed the IP adress, but still LOGO soft cant communicate with the LOGO unit. Same answer...... the PC and the devise are not at the same sub network...... any suggestions on what to do next........
logofan17 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

9/30/2016 5:58 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/7/2025 Posts: 35933 Rating: (4498)	Go you directly form PC to Logo or over an router?

Suggestion To thank Quote Answer

9/30/2016 6:07 PM	Rate (0)
logofan17 Posts: 5 Rating: (0)	Direct from PC to LOGO....... LOGO soft could see the MAC adress of the LOGO device, so there must be some sort of connection.......
logofan17 Posts: 5 Rating: (0)	Last edited by: logofan17 at: 9/30/2016 6:10:14 PM
Suggestion To thank Quote Answer

9/30/2016 6:31 PM	Rate (1)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/7/2025 Posts: 35933 Rating: (4498)	I once created a screen video. So you can see which settings have been selected for the PC. If you have multiple interfaces in the PC, you can select the right here. If characters are included in the name of the interface, this also leads to problems. When trying to connect, click the icon with the blue double arrow. Then you are shown the achievable logos and their settings in the window. Attachment Test.wmv (2197 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 6 thankful Users logofan17 lapko Diniz_ Md Gouse DL110 T_Rod1

10/2/2016 7:57 PM	Rate (0)
logofan17 Posts: 5 Rating: (0)	So i finanaly managed to find the right combination of IP, MAC and default gateway adress. so now i can communicate with the LOGO Thank you very mutch for your fine and informative video ixo65..... it gave me idea about what to look for, and how to navigate the program interface with regarde to PC and LOGO LAN details.......
logofan17 Posts: 5 Rating: (0)	Last edited by: logofan17 at: 10/2/2016 8:00:37 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

10/2/2016 8:16 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/7/2025 Posts: 35933 Rating: (4498)	I am glad that I could help even a success you yet. Have fun with the logo.

Suggestion To thank Quote Answer

1/9/2018 8:34 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	190/5000 Ja imam isti problem. Ne mogu prenijeti program između računala i LOGO! Postavio sam parametre prema vašim uputama. Prebacivanje programa ne funkcionira, ali ne pokazuje nikakve pogreške. Attachment PC.jpg (715 Downloads)

Suggestion To thank Quote Answer

1/9/2018 8:36 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	Properties PC Ethernet Attachment PC Ethernet.jpg (806 Downloads)

Suggestion To thank Quote Answer

1/9/2018 8:37 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	Properties PC Wireless Attachment PC Wireless.jpg (663 Downloads)

Suggestion To thank Quote Answer

1/9/2018 8:38 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	LOGO Attachment LOGO.jpg (683 Downloads)

Suggestion To thank Quote Answer

1/9/2018 8:43 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	Sorry for my text. This is original on english. I have the same problem. I can not transfer the program between PC and LOGO! I have set parameters according to your instructions. Switching the program does not work, but it does not show any errors.

Suggestion To thank Quote Answer

1/9/2018 8:54 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/7/2025 Posts: 35933 Rating: (4498)	How do you connect the PC to the LOGO!? Directly per LAN or per WiFi? Which LOGO! with which firmware version have you? Which LOGO!Soft Comfort version have you?

Suggestion To thank Quote Answer

1/10/2018 10:36 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	Drectly per LAN. LOGO! Soft Comfort V8.0. How I can see fermware version?

Suggestion To thank Quote Answer

1/10/2018 11:08 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	ja have found something, if it can help. Attachment LOGO! Soft Comfort.jpg (739 Downloads)

Suggestion To thank Quote Answer

1/10/2018 11:44 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	I have made upgrade to LOGO! Soft Comfort V8.1 Transfer program works per LAN, but per Wireless doesn't work, of course (I changed IP adress and getway of LOGO! device). I would like to work per both (LAN and Wireless) Attachment Upgrade to V8.1.jpg (652 Downloads)

Suggestion To thank Quote Answer

1/10/2018 11:58 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	Parameters for wireless Attachment Wireless parameters on LOGO.jpg (661 Downloads)

Suggestion To thank Quote Answer

1/10/2018 11:59 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	Error - Device inaccessible Attachment Wireless - Device inaccessible.jpg (834 Downloads)

Suggestion To thank Quote Answer

1/11/2018 3:55 AM	Rate (1)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/7/2025 Posts: 35933 Rating: (4498)	LOGO! can't WLAN. You must use a WLAN adapter with a LAN output or connect the PC directly per LAN with the LOGO!.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Md Gouse

1/11/2018 5:14 PM	Rate (0)
geronimo2 Member Joined: 8/10/2017 Last visit: 4/23/2025 Posts: 11 Rating: (0)	Yes, It works over WLAN adapter. Thank you!

Suggestion To thank Quote Answer

7/27/2024 9:06 AM	Rate (0)
AutoGen_5151555 Member Joined: 5/10/2019 Last visit: 3/4/2025 Posts: 1 Rating: (0)	ixo65 LOGO! can't WLAN. You must use a WLAN adapter with a LAN output or connect the PC directly per LAN with the LOGO!. can you please explain this more closely? I have wifi card on my PC, what do I need to do to make it work? thanks!

Suggestion To thank Quote Answer

7/27/2024 11:21 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/7/2025 Posts: 35933 Rating: (4498)	You must use a WLAN adapter with a LAN output. Then connect the LAN output of the WLAN adapter with Ethernet cable to the LOGO!. I use a TP-LINK WIFI Adapter Model No. TL-WA890EA.
	Last edited by: ixo65 at: 07/27/2024 11:37:09
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on