Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Can open and edit v5.4 sp2 project in v5.6?

Created by: sgunay at: 3/21/2021 6:36 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/21/2021 6:36 AM	Rate (0)
sgunay Advanced Member Joined: 11/6/2017 Last visit: 1/13/2026 Posts: 16 Rating: (0)	Hi, Can we open and edit v5.4 sp2 project in v5.6? Thanks ------------------------------------------------------------------------------------------ Split from Migrating project from STEP7 5.5 to 5.6.
	Last edited by: Jen_Moderator at: 03/22/2021 11:15:49 New subject after splitting
Suggestion To thank Quote Answer

3/29/2021 3:05 PM	Rate (0)
Cicero Platinum Member Joined: 10/10/2005 Last visit: 1/29/2025 Posts: 1940 Rating: (138)	Hello squnay, yes you can open the STEP 7 V5.4 project in STEP 7 V5.6. Consider, if you have created the STEP 7 V5.4 project with the optional software (e.g. S7-GRAPH, S7-SCL, CFC), so the optional software must also installed on the PC with STEP 7 V5.6. With best regards Cicero

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on