Default Header
(header konnte nicht geladen werden)
Navigation
Rating 
Thanks 0
7 Entries
| 4/20/2021 12:45 PM | |
|
Posts: 22 Rating:
|
Hello! Windows 10 Simatic Manager v5.6 When working in HW Config I can't erase the device Best regards. |
| 4/20/2021 12:47 PM | |
Joined: 5/12/2006 Last visit: 1/13/2026 Posts: 22796 Rating:
|
any message? maybe the project is write protected, this should be informed in a message if you open the project. |
| 4/20/2021 12:52 PM | |
|
Posts: 22 Rating:
|
a normal project, I can make changes in the program |
| 4/20/2021 1:01 PM | |
|
Joined: 5/12/2006 Last visit: 1/13/2026 Posts: 22796 Rating:
|
can you provide some screens? Which devices you try to delete/erase? |
| 4/20/2021 1:10 PM | |
|
Posts: 22 Rating:
|
|
| 4/20/2021 2:21 PM | |
Joined: 9/21/2012 Last visit: 1/13/2026 Posts: 4847 Rating:
|
What if you just try to select and delete one device at a time? |
| 4/21/2021 6:37 AM | |
|
Posts: 22 Rating:
|
I do so, it can be seen even in the screenshot, only one device is selected. |
Follow us on