Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How to make pulse FROM 6 SELECTOR SWITCH IN S300 PLC

Created by: ZEEN4ZEEN AMAZ1972AMAZ at: 5/11/2021 12:16 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

5/11/2021 12:16 AM	Rate (0)
ZEEN4ZEEN AMAZ197... Posts: 1 Rating: (0)	How to make pulse FROM 6 SELECTOR SWITCH IN S300 PLC ------------------------------------------------------------------------------------------ Split from Clock pulse in Step 7-s300. Attachment 33.png (428 Downloads)
ZEEN4ZEEN AMAZ197... Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 05/11/2021 10:37:05 New subject after splitting
Suggestion To thank Quote Answer

5/11/2021 9:15 AM	Rate (1)
Jazz_M Posts: 1121 Rating: (86)	Hi What is your actual application. As per your logic, i think the P coil will have to inserted near to each Open contact for the transfer of data..... or the Open contact are pulsed at different time intervals. Any how you need to tell us what ur planning to work on..... regards.
Jazz_M Posts: 1121 Rating: (86)
Suggestion To thank Quote Answer

5/12/2021 10:18 PM	Rate (0)
@CIONCO Bronze Member Joined: 1/17/2013 Last visit: 2/25/2025 Posts: 136 Rating: (23)	Absolutely true. Jazz_M Hi What is your actual application. As per your logic, i think the P coil will have to inserted near to each Open contact for the transfer of data..... or the Open contact are pulsed at different time intervals. Any how you need to tell us what ur planning to work on..... regards.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on