Default Header
(header konnte nicht geladen werden)
Navigation
Rating 
Thanks 10
| 6/4/2010 7:32 AM | |
|
Posts: 535 Rating:
|
Dear sidou1, if you want to get information about channel-faults, you have to read the system status list of the module via the SFC51. In the attachment you find a STL-source, which you also can find in the help of the SFC51. Best regards, yy1 Find additional info on the diagnostic data in this link. AttachmentOB82_sfc51.zip (1033 Downloads) |
Last edited by: yy1 at: 6/4/2010 9:44 AMAdditional link |
|
This contribution was helpful to
|
|
| 6/28/2011 4:03 PM | |
|
Posts: 35 Rating:
|
here it is as an attachement my program. Use this program and configurate for me only a DIAGNOSTIC fault of one channel of the first analogique input. this fault must be shown as an alarm in my MP 270.
Attachmentcompresseur cooper_Co_.zip (740 Downloads) |
| 6/28/2011 4:22 PM | |
|
Posts: 270 Rating:
|
Dear sidou1, I saw your problemhere on the forumand I would also like to help you. I personaly think, that this topic might help you, it might not seem easy at first glance, but once you get into it, I am sure it will work out really great for you. Anyway, have a nice day. Best regards, MM1234 P.S. I hope your technical problem will work outtoo, unfortunately I don't seem to see into that very well. |
| 6/28/2011 5:30 PM | |
Joined: 10/7/2005 Last visit: 1/16/2026 Posts: 3054 Rating:
|
Hello sidou1 now that we've established that you use a Siemens HMI, you could of course simply use the inbuilt Report System Error functionality, just to mention it. |
|
Cheers |
|
Follow us on