Timer S_PULSE digital output strange behaviour

I'm trying to activate one digital output from DQ 4x24VDC/2A ST (6ES7132-6BD20-0BA0) module by S_PULSE timers.

However, I find a strange behaviour: when I program the timer with a TV = S5T#5S500MS, the led on the module turns on properly for the lapse set, but when I program it with a TV = S5T#1S300MS, the led doesn't turn on.

I don't understand why is this happening.

I attached an image of the programmed timers

(STEP 7 version: 5.6)

rluqueb

However, I find a strange behaviour...

 No, you simply have no idea of PLCs.

Net 12 outputs are overwriting same outputs from previous network.

jacek d

 

rluqueb

However, I find a strange behaviour...

 No, you simply have no idea of PLCs.

Net 12 outputs are overwriting same outputs from previous network.

That's right, sorry for my ignorance, I didn't realized it.

So, in case I need 2 different timers for controlling the same outputs Q1.0 and Q1.4, how could I handle it? 

Try this

rluqueb

So, in case I need 2 different timers for controlling the same outputs Q1.0 and Q1.4, how could I handle it? 

Or something like this.

Difference to previous example is that here you can start both timers simultaneously. Example shows using timers outputs by ORing them before applying to outputs. But you can use whatever logic you like.