Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Block created in Assembler

Created by: manmeet at: 3/1/2009 3:31 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/1/2009 3:31 AM	Rate (0)
manmeet Gold Member Joined: 1/3/2006 Last visit: 1/13/2026 Posts: 726 Rating: (71)	Hi there There is a block in S7 which says that "Created in Language" -->"Assembler" I have seen STL, LAD, SCL but how come this "Assembler" comes in? When I double click the block it says "Block cannot be handled with this tool" help on this says: "This block cannot be edited with the selected application as it was written in a different editing language." Any hints

Suggestion To thank Quote Answer

3/2/2009 8:29 PM	Rate (0)
jklm Posts: 1742 Rating: (309)	Hello, Where is the block coming from? Was it part of a program coming from - an M7 system? - a WinAC?
jklm Posts: 1742 Rating: (309)
Suggestion To thank Quote Answer

3/3/2009 10:07 AM	Rate (0)
manmeet Gold Member Joined: 1/3/2006 Last visit: 1/13/2026 Posts: 726 Rating: (71)	Hi there No it was with one of the project which I downloaded from net. If say I wanted to see the MC7 code of this block then how can I do this?

Suggestion To thank Quote Answer

3/3/2009 3:31 PM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 1/11/2026 Posts: 550 Rating: (107)	Hi there, You either are talking about a CPU-614 with custom FB for plastic applications or a SINUMERIK CNC CPU (C for S7 language). There are many languages developed by Siemens for S7, one of them is Assembler. Dec

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on