Have problem with DB1

I am make program in  OB1 and S7 graph and make in automatic call (FB1 -DB1) to execute the program in s7 graph but when save told me (there are still invalid address or jump lables in the network and give DB1  in red . i dont know what he mean.and what i can do to slove this issue.

thanks.

Hello Ahmed,

what is the type of your data? what do you want to do? do you have a FC or FB  in OB1 and you want to give them input from DB? please explain more...

I am have FB (function block) in OB1  called  (DB1)

i design anew program to machine  i see it must be two mode 

1- in manual i  program in OB1 ladder 

2- when make autonomic  go to s7 graph to  execute the automatic program .

I was have a problem with BD1 but i solved the problem by make anew program and copy the old program to  anew project .

but i have a new problem when make simulation

WHEN monitor have massage  monitor (33:276) block  not found 

what this mean ?

realy i dont understand what FB ,FC ,OB1 

thanks

Boa noite!

Quando aparecer a mensagem "Monitor 33 276 - Block not found" é porque o bloco não foi encontrado e voce precisa fazer o download do bloco.

Caso não esteja habilitado essa opção, você pode fazer o download da Station.

Segue anexo as imagens.

Hi Sandra VM,

welcome to the Technical Forum 

Please try to discuss your answer in English language. This is an international community and we try to focus on one language.

This is the translation of your answer:

Sandra VM

Good evening!

When the message "Monitor 33 276 - Block not found" appears, it means that the block was not found and you need to download the block.

If this option is not enabled, you can download the Station.

Here are the images attached

 Regards,
Jen_Moderator