Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

GetCurrentUser not working

Created by: AutoGen_4526198 at: 8/4/2021 4:53 PM (1 Replies)

Rating (1)

Thanks 1

2 Entries

8/4/2021 4:53 PM	Rate (0)
AutoGen_4526198 Bronze Member Joined: 4/12/2018 Last visit: 1/10/2026 Posts: 207 Rating: (14)	I have a script on Sub OnChange, the scripts return the current user name, but if the user is not in the user tree in engineering or base objects it returns a blank, so i did an else but this also does not work... any suggestions ' Set current user Set objSpec = objTab.spec("Z15C10111") If Not objSpec Is Nothing Then Set objCurUser = Project.Workset.GetCurrentUser strUsersUID = objCurUser.GetRemark(5) msgbox "User does not exist in User Tree!" Set objSpec.LinkObject = objCurUser.SystemUID End If
	Last edited by: RuAvAnD at: 08/11/2021 10:46:10
Suggestion To thank Quote Answer

8/9/2021 9:22 AM	Rate (1)
Wouter den Haan Posts: 72 Rating: (32)	Here you are trying to assign a string as an object; Set objSpec.LinkObject = objCurUser.SystemUID
Wouter den Haan Posts: 72 Rating: (32)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_4526198

|

Share this page:

Share this page on...

Follow us on