PXM40.E 3rd Party Devices

Hello, I have a site where I need to send bacnet ip points to a PXM40.E.  All the device on the network see the JACE 8000 and the JACE 8000 sees all the devices as well, including the PXM40.E.  When I try to discover the JACE 8000 from the touch panel with the 3rd party devices option set to yes the touch will not discover the JACE only the other Siemens touch panel.  What might be the issue here as this should be easy and flawless?

Thanks in advance. Alex

Hi,

I would like to recommend to check the IP settings for PXM40.E - GW + mask.+ BACNET port.

Those can be a bit different from others devices and then the discovery maybe wrong.

AutoGen_8505029

It was the subnet mask 

 😉 That's great that you found that.