Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

help redording in the data block

Created by: aguere at: 3/4/2009 7:59 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/4/2009 7:59 AM	Rate (0)
aguere Posts: 48 Rating: (1)	Hello, First I´m sorry for my bad English. I need to made a program tha when change the week , record 6 dword into the db. But when change , record the same 6 dword in different addrees. I try with udt, etc...but alway have a error, or do not is I looking for. I found in this same forum, a little program for to know the number of the week, is right,I want to use this data for record data (6 dword)all the year, but change address into the db. I need after to show in the db different week, and can to show in wincc. In the db should record the data ech week. Thank you very much. Greeting from Canary Islands
aguere Posts: 48 Rating: (1)
Suggestion To thank Quote Answer

3/5/2009 6:19 PM	Rate (0)
Denilson Pegaia Diamond Member Joined: 9/23/2005 Last visit: 1/14/2026 Posts: 4447 Rating: (1487)	Hi, take a look at the attached file. It could help you to "stack" the information: Attachment STEP 7 Staker.zip (328 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on