Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Correct value presentation

Created by: StavrosGR at: 3/12/2009 8:22 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/12/2009 8:22 AM	Rate (0)
StavrosGR Posts: 52 Rating: (4)	Hello to all Here is my problem. I have connected a S5 CPU 943 to a pc via serial cable , and everything works fine. the problem is that i have built a project to Protool so we can have control of the cpu, but when i try to have an output from the cpu that comes from a KT type of value is not represented right. In example when i have an s5 timer of 10 sec in the protool runtime is represented as 10000. what can i do?
StavrosGR Posts: 52 Rating: (4)
Suggestion To thank Quote Answer

3/12/2009 1:47 PM	Rate (0)
umencho Diamond Expert Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Hello Stavros, Look at Transfer of S5 Time values (Timer data type) from an OP to the controller. In Windows-based devices the S5 Time is transferred to the controller on a time base of milliseconds... regards

Suggestion To thank Quote Answer

3/12/2009 3:59 PM	Rate (0)
StavrosGR Posts: 52 Rating: (4)	Thank you very much. This is what I was looking for.
StavrosGR Posts: 52 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on