Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Wincc Felx 2005 installation error

Created by: DIVS at: 5/22/2006 1:12 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/22/2006 1:12 PM	Rate (0)
DIVS Posts: 1 Rating: (0)	Duringinstallation of WinCC Flex 2005 onWinXP (SP2)professional system, i am getting following error. "Setup Failed to configure the server. Refer to the server error logs and setup error logs for more information" With above error during installation, WinCC is getting installed in my system but, i am not able to open any project or create new project. While opening any project it is giving following error "Can not initialize SQLDMO server class. This usually idicates a corrupt Database installation. Try to reinstall the wincc Flexible Database Server (See Readme)" I have reinstalled Database server as per procedure mentioned in "Readme File". Still i am getting the same error during opening any project in Flex Kindly guide me how to come out of above trouble....
DIVS Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/22/2006 1:35 PM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 10/24/2024 Posts: 414 Rating: (28)	Hi, Have you tried an install after a complete uninstall of WinCC flexible 2005? Have you ever installed winCC flexible 2004 and uninstalled it correctly? See http://support.automation.siemens.com/WW/view/en/22350636.
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on