Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Hardware configuration in step 7 does not show congigured ET200SP modules

Created by: spatil at: 12/23/2021 7:57 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/23/2021 7:57 AM	Rate (0)
spatil Experienced Member Joined: 3/30/2011 Last visit: 3/19/2025 Posts: 20 Rating: (0)	Dear Experts, I get an error while opening the hardware of the project. Please see attached screenshot. I have tried with Step7 v5.5 and v5.6 but can not see modules configured in the project. Tried the update option online but listed modules are not seen in this, can someone help to get it working? Modules not seen in hardware (need to install packages for this) 1)DI8x24VDC/0.5A ST 2)DQ8x24VDC/0.5A 3)Servermodul v 1.1 4)AQ2xI ST v1.0 5)AI2 x ST V 1.0 6)AQ2xU St v11.0 Attachment ModuleError.jpeg (470 Downloads)
	Last edited by: spatil at: 12/23/2021 08:52:40
Suggestion To thank Quote Answer

12/23/2021 9:02 AM	Rate (0)
8Noodles Posts: 1086 Rating: (53)	Hi, did you install the gsd file? https://support.industry.siemens.com/cs/us/en/view/57138621
8Noodles Posts: 1086 Rating: (53)
Suggestion To thank Quote Answer

12/23/2021 10:13 AM	Rate (0)
spatil Experienced Member Joined: 3/30/2011 Last visit: 3/19/2025 Posts: 20 Rating: (0)	I am unable to find exact GSD files for these modules, can you help?

Suggestion To thank Quote Answer

12/23/2021 10:38 AM	Rate (0)
sancruz Gold Member Joined: 3/11/2019 Last visit: 12/9/2025 Posts: 1653 Rating: (322)	Hi, the screenshot shows missing HSP (Hardware Support Packages) not GSD files. Please check following link and install all available HSP, maybe this helps. STEP 7 V5.x Hardware Support Packages (HSPs - as at 09/2021) for installing hardware updates in the Hardware Configuration regards sancruz
	Feedback appreciated, please rate
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on