Error not enough local memory.

Hi,

CPU: 412-5 H Pn/pn Setup

I got a SF fault because I was using to much local data in priority class 1, so I increased from 758 to 1024.

Do be able to decrease the data allocated to priority 1 I decreased from 758 to 658 for priority class 9, 10 and 12.....

How can I check how much each priority class need ?

I`m afraid I have created another problem now.... ???


Before and current:

hi gordonere,

you can check the needed local data for priority-classes with reference data:

hope this helps,

regards,

Thank you ! :)

I understand you need to SUM manual, that is fine but a total would also be nice :)